INDUCTION MELTING FURNACES IN STOCK

 Cooling Towers in Stock

  • EVAPCO Closed Type, Model LSWA, (2) Available, 100 GPM
  • (2) LIEBERT Drycoolers, Model 940, 8 Fans
  • (2) LIEBERT Drycooler, Model 740, 6 Fans 

INDUCTOTHERM MELTING SYSTEM, LOW HOURS

  • VIP Power Trak, 225 Kw, 3200 Hz, (2) 150 Lb Hydraulic Boxes, (1) No. 100 Push Up, Inductotherm Dual Pumping Station, (3) Pumps, Expansion Tank, Control Panel, LIEBERT Drycooler, 8 Fan
  • With 2 Ton Self Supporting Overhead Pouring Crane
  • Gas Fired 3 Station Ladle Pre Heat Station 

 

 INDUCTOTHERM 

INDUCTOTHERM 10 Ton Twin Melting System, VIP Power Trak, (2) 6000 Kw, 300 Hz Power Supplies, (2) 10 MT Steel Shell Furnaces, Water Pumps, Bus Bars, Power Cables, (2) Charge Feeders, (4) 3500 Kva Transformers, Spare New Coil

NEW/REBUILT Inductotherm DUAL TRAK Power Supply, Original Age 2013, 3500 Kw, 300 Hz, As New, Serial Number 13K- 299179-246-11, Power Input 3805 KVA, 6 Phase, 60 Hz, Power Output 3500 Kw, 2200 V, 300 Hz With 6 Month Warranty, 24/7 Technical Support.  (photo)

  • Inductotherm MG Set, 100 Kw, 3000 Hz, 3650 RPM, wtih a 500 Lb. Hoist Tilting Box, Cables Included
  • Inductotherm VIP Power Trak, 125 Kw, 3200 Hz, with 50 Lb. Hydraulic Rollover Furnace, 1980, Spares
  • Inductotherm VIP Power Trak, 250 Kw, 1000 Hz, with 1000 Lb. Hydraulic Furnace, 650# Hoist, New 1990
  • Inductotherm VIP Power Trak 400-10, 400 Kw, 1000 Hz, (1) 1000 Lb. Hydraulic Furnace, Just Removed
  • Inductotherm VIP DUAL TRAK, for Aluminum Melting, 750 Kw, 60 Hz, (2) 1.3T Aluminum Capacity Furnaces
  • Inductotherm VIP Power Trak 1000-10R Power Supply Only, 1000 Kw, 1200 Hz, 1996
  • Inductotherm VIP Power Trak 1000-5CR Power Supply Only, 1000 Kw, 700 Hz, 1993
  • Inductotherm VIP Power Melt, 2500 kw, 200 Hz, with 12 Ton Steel Shell (UK Location)
  • Inductotherm VIP Power Trak, 1000 Kw, 1000 Hz, with (2) 2.5 Ton Duraline Hydraulic Boxes, 1996
  • Inductotherm VIP Power Trak, 1500 kw, 700 Hz, (1) 8000 Lb. Steel Shel, 1990 (low hours!)
  • Inductotherm LIFT Swing Furnace for Non Ferrous, Model 100, 300 Lb Brass/Copper, 100 Lb. Aluminum, Hydraulic (photo)

AJAX Induction Furnaces

  • (2) AJAX Steel Shell Furnaces, Removed from 1000hz system, 4T Capacity,  New 2004
  • AJAX PACER-I Induction Furnace, S/N M90750A, 500 Kw, 700-1100 Hz, 1 Ton Box, Spare Coil, 1990
  • AJAX PACER-II Induction Furnace, S/N M97630C, 500 Kw, 700-1100 Hz, 1 Ton & 1/2 Ton Boxes, Spare Coil, 1992

 PILLAR Induction Furnaces

  • PILLAR Mk8, 450 Kw, 600 Hz, 4000 Lb. Steel Shell Furnace, Accessories, New 2003
  • PILLAR Mk7, 2000 Kw, 600 Hz, 4T Steel Shell, In Place Under Power, with Charge Feed System

 ABB Induction Furnaces

  • (2) ABB Induction Power Supplies, 3000 Kw, 230 Hz each, Both with Allen Bradley PLC Station, With (2) Alstom Transformers 13,800, 3500 KVA each, with (4) Twin Furnace Water Pump Modules, (2) Twin Hydrauic Pump Stations
  • 1997 ABB Induction Melting Furnace, IFM-6, 6000 Kw, 250 Hz, (2) 10T Steel Shell Furnaces, "TWIN POWER", Complete As In place with Scrap Feed System, Pivot Conveyor, Control Room, Back up Generator, 7300 Kva Transformer  

INDUCTION HOLDING AND POURING FURNACES  

  • Year 2013 Inductotherm Pressure Pour, 300 Kw IGBT Power Supply, 7.5 Ton Usable Capacity, with Spare Inductor Set, Water Pumps, Hydrauilc Pump, Selcom Laser, Very Good Condition, Still Installed (photos)

  • Inductotherm Pressure Pour Automatic Pouring Furnace, "VISI POUR", 500 Kw, 10T Furnace Capacity, New 2001 

VACUUM INDUCTION MELTING (VIM) 

  • 1992 Large Ionex Melt Unit. Houses A 260 Lb. Vessel With A Rotatable Table. SN: 2738. The Table Also Moves Up And Down For Accurate Pouring Capabilities. The Tilt Has A Hydraulic Assist For Smooth Operation. The Unit Uses A 3000 Hz 15 Kw Pillar MK8 Power Supply. Unit Has Diffusion Pump With A Hi Vac Feature. Normally See 5 To The Minus 4. Currently Operable. History Of Machine Design Included With (3) Manuals And (3) Power Supply Manuals Additional Accessories To Include: (4) Tooling Cabinets/Racks Of Spare Parts And Tools, (1) Pallet Of Spare Parts, (2) Racks Of Molds, (2) Mold Carts - (1) Operational, Additional Vessel Packing Powder, Claps And Hand Tools As Seen In The Photos, photos:https://www.dropbox.com/sh/xbt7q7qdgqoi6qy/AAAdZWqU2PEcUUjgvA1v84rEa?dl=0 

  • Ionex 6 liter cap Vacuum Induction Melter . System features (1) Stokes/Edwards rotary vane vacuum pump model 212M-11, mfd 2011, s/n RS0044404, with 7.5 hp motor and Edwards 310-401 Blower mfd 2010 s/n RS0038938; (1) Varian Diffusion Pump model VHS-10, 480V, 3 PH, 4400 Watts, fluid chg. 1000 cc, s/n LDD60021; (1) 1 hp Trivac holding pump; BSI touchscreen human/machine interface with Inficon TGVC401 vacuum pressure gauge; Pillar Power supply Mk8, 100 KW/3KHZ; Sunsource airdraulics hydraulic reservoir & pump with model V0C55P heat exchanger (photos)
      
  • Inductotherm Vacuum Induction Melting System, Model VIP Power Trak 125-30, S/N 80-75075-246-11, 125 Kw, 3.2 Khz, 460/3/60, 400 Volt Output Capacitors, Enclosed Water Pump in Power Supply, Books, Manuals, and Drawings, GCA Corporation Vacuum Control System, Series 4300 Vacuum Induction Melting Furnace, Rated at 50 Lbs., Mold Lift Mechanism, Mechanical Rough Pump, 300 CFM, Refrigeration Unit, Stokes Diffusion Pump, Hydraulic Pump, GCA Control Panel Steel Cabinet with Parts, All GCS Books, Manuals, and Drawings (photo) 

 

GAS Furnaces 

  • MIFCO 30 Lb. Aluminum Capacity (2 Avalable)
  • (2) Frank Schaefer Tilting Gas Furnaces, 3000 Lb. Capacity

 

SPARE PARTS/MISC. - INDUCTION MELTING

  • EVAPCO Closed Type Water Cooling Tower, Model LSW-18
  • (2) REBUILT Joslyn Switches, 15 Kv
  • New Inductotherm High Frequency Transformers, In Crate, Used with Power Trak 125-30, Part Number XFRMTT-2400-122, IP# 1620291, Serial Number 11-5-114, (2-Available)
  • (5) New Inductotherm Rollover Coils, Complete, 50 Lb. Capacity, New In Crate
  • INDUCTOTHERM PUSH OUT RAM FOR LINING, Hydraulic 
  • Westinghouse Furnace Transformer, 850 Kva, 13,800 to 480 Volts, Three Phase
  • EMSCCO Slag Skimmer, New and Never Used (photo), More Info Here: http://emsco.com/blog/products/slag-skimmer/

 

Pouring Ladles In Stock

  • IE Teap Pot Ladle, 1000 Lb., Geared
  • L449, Geared Pouring Ladle, 16" X 22", With New Liner
  • L451, Geared Pouring Ladle, 16" X 22", 500 Lb
  • L445, Bottom Pour, Geared, 49" Dia X 55" Ht, V Bail
  • L442, Lip pour, Geared, 40" Dia X 50" Ht, V Bail
  • L446, Bottom Pour, Geared, 60" Dia X 68" Ht, Square Bail
  • L444, Bottom Pour, Gearted,58" Dia X 66" Ht, Square Bail
  • L447, Lip pour, Geared, 34" X 34", V Bail 

 Manipulator

  • Clansman Dynamics Manipulator, Used in Melt Shop, Model 3010-M, Mobile, 4000 Lb. Capacity, Some Spare Parts (in Stock)

 

 
Copyright 2007. World Equipment & Machine Sales Co. All Rights Reserved.